• You need to be a registered member of Barbel Fishing World to post on these forums. Some of the forums are hidden from non-members. Please refer to the instructions on the ‘Register’ page for details of how to join the new incarnation of BFW...

New rods wanted. C3’s vs basis vs mark tunleys dark carbons any info on these 3 please pros and cons.

Ian Murfin said:
I've been through a few rods although not the Basias. I'm very happy with my 2.25 C3's, to the point where I dont have itchy feet and I'm not looking to try the next great thing. They are great at casting heavy feeders, but still give a very enjoyable fight which is the main thing for me.
Click to expand...
Thank you mate yep think it’s between the basia and c3 tbh atm. Maybe more basia as more readily available and cheaper slightly. Going to try have a look at both.
 
Neil Smart said:
To be honest I can never see why such concerns over very expensive carbon is that much better than any off the shelf rods, especially when chucking heavy leads into big rivers such as the Severn or Trent?
Sure I get the reasons why big money is spent on float rods where balance and action is paramount.
Genuinely interested if anyone could put me right, because I am a sucker for the recommendations on here, so before I bin my old Drennan's and empty my bank account in favour of Mr Tunley, is it all worth it ?🤔
Click to expand...
If you're on a budget. It's probably hard to justify the additional spend. You'll probably catch as many barbel on a Korum rod. Nothing at all wrong with Korum rods. Many of us like the custom builds because it's part of the fun of the sport , nice to look at and to use. I have the C3's and cant fault them although I've never seen the Daiwa range of barbel rods. I fish the tidal and they're more than adequate for the job.
 
Last edited:
Ady Brayshaw said:
If you're on a budget. It's probably hard to justify the additional spend. You'll probably catch as many barbel on a Korum rod. Nothing at all wrong with Korum rods. Many of us like the custom builds because it's part of the fun of the sport , nice to look at and to use. I have the C3's and cant fault them although I've never seen the Daiwa range of barbel rods. I fish the tidal and they're more than adequate for the job.
Click to expand...
Now in my time of life, I can actually afford top quality gear if I wanted to go down that route.

But from as as a kid I had to make do with mostly home made rods and reels that were round but that was the only thing they resembled a 'pin'.,

And who remembers making your all in one bank stick / rest in metal work?
Metalwork? Ahh yes when lads were taught such along with woodwork too, and the girls needlework and cooking, there was a clear definition of sexes and role play back then, no transitioning from the kitchen to the furnace🙂

So I guess my humble poor beginnings has shaped my values, I just cannot justify spending £400 on a rod, I would be too frightened to use it in case I marked it or stepped on the thing.
Good luck to those that do, it is you that have no hang ups.
 
Niall Stretton said:
Thank you mate yep think it’s between the basia and c3 tbh atm. Maybe more basia as more readily available and cheaper slightly. Going to try have a look at both.
Click to expand...
Have a look at 12' Torrix in 2.25 if you like premium rods - very versatile; 2-5oz loaded feeders with a nice tip and backbone for monsters in reserve. I'm a carp angler primarily and eeer on the side of being able to bully barbel (rods and reels); not really interested in finesse especially on rivers unless I'm trotting and even then I'll go heavy. Also great floater fishing rods for carp and mid range tench / big bream bashing tools . . .
 
Neil Smart said:
Now in my time of life, I can actually afford top quality gear if I wanted to go down that route.

But from as as a kid I had to make do with mostly home made rods and reels that were round but that was the only thing they resembled a 'pin'.,

And who remembers making your all in one bank stick / rest in metal work?
Metalwork? Ahh yes when lads were taught such along with woodwork too, and the girls needlework and cooking, there was a clear definition of sexes and role play back then, no transitioning from the kitchen to the furnace🙂

So I guess my humble poor beginnings has shaped my values, I just cannot justify spending £400 on a rod, I would be too frightened to use it in case I marked it or stepped on the thing.
Good luck to those that do, it is you that have no hang ups.
Click to expand...
Yes happy days in the woodwork and metalwork classes. Especially, as the teacher was a nationally known angler recognised for his inventiveness. Unfortunately, eventually to be dropped, to go in a different direction.
 
You must log in or register to reply here.
Back
Top