Steve Jones
Senior Member
Hi gang, one of our members posted a wanted for a fox specialist brolly or similar, I said I'd purchased a cheap one and would modify it to suit.
The center pole stuck out a good 8 inch past the center boss after unscrewing
the pole. So I drilled through the boss to provide a temp means of holding the brolly open. Then I cut half the center boss off giving more space. The center pole had a M10 thread in it, that was cut out and hammered back into the remaining section of the central pole. A M10 bolt with a locking nut and washer provided a stopper.
It came with shock corded tent poles to support the mini sides which I replaced with storm sticks, cut about 2 inch of the sleeves and bingo bongo a light weight low day session brolly
The center pole stuck out a good 8 inch past the center boss after unscrewing
the pole. So I drilled through the boss to provide a temp means of holding the brolly open. Then I cut half the center boss off giving more space. The center pole had a M10 thread in it, that was cut out and hammered back into the remaining section of the central pole. A M10 bolt with a locking nut and washer provided a stopper.
It came with shock corded tent poles to support the mini sides which I replaced with storm sticks, cut about 2 inch of the sleeves and bingo bongo a light weight low day session brolly
Attachments
Last edited: