• You need to be a registered member of Barbel Fishing World to post on these forums. Some of the forums are hidden from non-members. Please refer to the instructions on the ‘Register’ page for details of how to join the new incarnation of BFW...

For sale Punk Custom 11ft twintip Barbel Elite

Marcus Cherry

Marcus Cherry

Member
Hi, all just taken this one off the drying rack this weekend. So ready to go to a new home, its a Punk Custom 11ft Twin Tip 2.0 & 1.75 Test built on a H&H Evoke, 3k carbon weave, this rod has two tips, 2lb test and 1.75lb test. The 2lb test tip is a full 3k weave, while the 1.75lb test tip is a 3k with a removable solid carbon tip. The rod features a fitted 1k carbon DPS reel seat and super grade cork, as well as a Fuji solid rubber Butt and the guides are top end Fuji Titanium Torzite in dark smoke. Finally, the rod is whipped in twist tread and blue ribs with a high build epoxy finish. Comes in a custom built rod sleeve. £425 on the website but 15% off for forum members so £360. Please feel free to ask any questions kindest regards Marcus
 

Attachments

  • 20231016_094232.jpg
    20231016_094232.jpg
    141.1 KB · Views: 382
  • 20231016_093550.jpg
    20231016_093550.jpg
    125.3 KB · Views: 335
  • 20231016_094040.jpg
    20231016_094040.jpg
    109.7 KB · Views: 324
  • 20231016_094051.jpg
    20231016_094051.jpg
    104.7 KB · Views: 322
  • 20231016_094008.jpg
    20231016_094008.jpg
    125.6 KB · Views: 323
  • 20231016_093619.jpg
    20231016_093619.jpg
    134.7 KB · Views: 314
  • 20231016_093628.jpg
    20231016_093628.jpg
    115.6 KB · Views: 312
  • 20231016_093428.jpg
    20231016_093428.jpg
    137.3 KB · Views: 324
  • 20231016_093512.jpg
    20231016_093512.jpg
    189.6 KB · Views: 332
Wow. Only alteration I would make is a silver Wye butt cap( to match my peregrine's) that's just me. But
truly beautiful.
 
Lovely looking blank and I really like what you've done with the build 👍
I think the price point for a bespoke rod is about right for a twin tip. Again I like the concept of a tip rod on the lighter section.
Just an observation here, but you're into Harrison territory at that level and as you'll see on here, there is no end of debate/ discussion on various Harrison( and Free Spirit) blanks and regardless of whether one prefers a Chimera over a Torrix etc there is plenty of feedback on the nuances of the blanks and positive experiences to persuade someone to part with their hard earned..
In the unlikely event that you buy before you try, and it's not for you, Harrisons / Free Spirit are always in demand and tend to hold their value better than most, so more of a safe bet if you need to move it on.
I am aware of H&H as suppliers of rod building components but don't know anything about the blanks, Perhaps a bit of info on the rod blank would be useful?
But really like what you've done and if I was in the market, I really like the look of them but would need a bit of convincing to leave the cult of Dr Steve.

p.s. Do you build on other manufacturer blanks?
 
Thank you so much for your feedback I really appreciate it. I have just been accepted as a trade for Harrison after Steve and Mike from Harrison looked at my work so have a few blanks on there way. I've been building rods for 20 year now mostly fly rods,and pretty much all sold to customers in the States but due to everything costing so much it became so unviable. A good friend took me barbel fishing last year and that did it for me I was hooked good and proper, then I ended up getting made redundant. So hence Punk Customs was born. I'm Aiming to just stick with barbel and Specialist rods. As carp rods make me die inside😂. Any way thanks again for your advice.

Kindest regards Marcus
 
Paul Richardson said:
Lovely looking blank and I really like what you've done with the build 👍
I think the price point for a bespoke rod is about right for a twin tip. Again I like the concept of a tip rod on the lighter section.
Just an observation here, but you're into Harrison territory at that level and as you'll see on here, there is no end of debate/ discussion on various Harrison( and Free Spirit) blanks and regardless of whether one prefers a Chimera over a Torrix etc there is plenty of feedback on the nuances of the blanks and positive experiences to persuade someone to part with their hard earned..
In the unlikely event that you buy before you try, and it's not for you, Harrisons / Free Spirit are always in demand and tend to hold their value better than most, so more of a safe bet if you need to move it on.
I am aware of H&H as suppliers of rod building components but don't know anything about the blanks, Perhaps a bit of info on the rod blank would be useful?
But really like what you've done and if I was in the market, I really like the look of them but would need a bit of convincing to leave the cult of Dr Steve.

p.s. Do you build on other manufacturer blanks?
Click to expand...
On a slightly different rid but to emphasise how I agree with uour vo.ments Paul. About 2 years ago I was in my pals tackle shop when the middy rep was there, who I had met before. He was showing the latest middy rod, the quartix, around £300. Cutting a long discussion short I expressed the view that as it was some 50% or so more than their current top of the range it must be something special. But I added middy rods had little retail value when used. Always wanted one but. Then a month or so ago on ebay a stockist started to auction some off all 13's. About 25 by now I think. Anyway ,I was right, it really is something else. Insanely sensitive tips. Very pleased though I waited! But not parting with it either.
 
You must log in or register to reply here.
Back
Top