• You need to be a registered member of Barbel Fishing World to post on these forums. Some of the forums are hidden from non-members. Please refer to the instructions on the ‘Register’ page for details of how to join the new incarnation of BFW...

Flying back leads

Ian Murfin

Senior Member & Supporter
Do flying back leads work as intended in a river scenario? If casting down stream i can picture them moving down the bow of line to the main lead defeating the object. This could be mitigated by using a float stop, a few feet from the lead, to hold them in position, but then i can see them lifting off the bottom, unless there is a large amount of slack in the line. Have any of you seen any underwater footage that confirms that they work? I'm particularly thinking of a big river like the Trent.
 
I’ve not seen any footage but I use the tungsten flying back-leads on the WA and Lower Severn.

I have them approx 1m from my lead and I’d say they’ve changed my fishing in a positive way. I’m catching more fish.

I don’t always use floats stops and sometime use a piece of PVA tied in a double knot.
 
Do flying back leads work as intended in a river scenario? If casting down stream i can picture them moving down the bow of line to the main lead defeating the object. This could be mitigated by using a float stop, a few feet from the lead, to hold them in position, but then i can see them lifting off the bottom, unless there is a large amount of slack in the line. Have any of you seen any underwater footage that confirms that they work? I'm particularly thinking of a big river like the Trent.
I've always thought the same, particularly in a big river, if you're using 3 or 4oz+ to hold bottom, I can't see how a small backlead (fixed or not) doesnt travel downstream as far as the bow of line allows.
On the Ribble I'm not using backleads, but using 6ft hooklinks instead - it's a snaggy river, so it saves catching up in something else.


On small rivers I can see how they'd help, but I don't understand how the likes of Alan Stagg etc are getting a 6gram weight to hold on the Thames, unless they're in slackish water?
 
Do flying back leads work as intended in a river scenario? If casting down stream i can picture them moving down the bow of line to the main lead defeating the object. This could be mitigated by using a float stop, a few feet from the lead, to hold them in position, but then i can see them lifting off the bottom, unless there is a large amount of slack in the line. Have any of you seen any underwater footage that confirms that they work? I'm particularly thinking of a big river like the Trent.
I am of exactly the same mindset.

On lowland rivers such as the HA or small intimate rivers, where you are fishing for wary fish, close in and placing a rig in position I can see a benefit as you know exactly where the rig is and how it's positioned.

Anywhere more than a rod length out and with any flow and/or depth I can't fathom how they can work unless they are particularly heavy but then casting accurately would be a major issue.

A friend many years ago did some underwater filming for his book, (there's a full chapter on barbel rigs and how they present underwater, I think it may have been on the Warks Avon) with small back leads (like the ones Gardner now do) and he found them to get lifted off the bottom by the flow when casting across river.

Interestingly it was Stuart Morgan who did the underwear photography.

Pic of the page on back leading attached.

Thanks

Lewis
 

Attachments

  • 20261027_173707.jpg
    20261027_173707.jpg
    138.5 KB · Views: 107
I use a 1/2oz arsley bomb back lead stopped with a float stopped 2-3ft up from a main lead of 1oz when fishing close in and 4-5ft apart if casting a further out 2 rod lengths, and will step up to 1oz back lead and 1.5oz main lead when the flow requires it, the most important thing for me is that the back lead is always lighter than the main lead and heavy to hold bottom comfortably in the flow and not hang off the bottom with the first bit of debris that fouls the line. So these small back leads of 6-8g are of no use whatsoever unless you’re fishing slack water. IMO
 
I am of exactly the same mindset.

On lowland rivers such as the HA or small intimate rivers, where you are fishing for wary fish, close in and placing a rig in position I can see a benefit as you know exactly where the rig is and how it's positioned.

Anywhere more than a rod length out and with any flow and/or depth I can't fathom how they can work unless they are particularly heavy but then casting accurately would be a major issue.

A friend many years ago did some underwater filming for his book, (there's a full chapter on barbel rigs and how they present underwater, I think it may have been on the Warks Avon) with small back leads (like the ones Gardner now do) and he found them to get lifted off the bottom by the flow when casting across river.

Interestingly it was Stuart Morgan who did the underwear photography.

Pic of the page on back leading attached.

Thanks

Lewis
‘Underwear photography’; I will have to ask him about that…….
 
I am of exactly the same mindset.

On lowland rivers such as the HA or small intimate rivers, where you are fishing for wary fish, close in and placing a rig in position I can see a benefit as you know exactly where the rig is and how it's positioned.

Anywhere more than a rod length out and with any flow and/or depth I can't fathom how they can work unless they are particularly heavy but then casting accurately would be a major issue.

A friend many years ago did some underwater filming for his book, (there's a full chapter on barbel rigs and how they present underwater, I think it may have been on the Warks Avon) with small back leads (like the ones Gardner now do) and he found them to get lifted off the bottom by the flow when casting across river.

Interestingly it was Stuart Morgan who did the underwear photography.

Pic of the page on back leading attached.

Thanks

Lewis

Under wear photography 👀😬any pics
 
I use these on the Warks Avon mainly to convince myself the line is pinned down 18inches behind the lead .

So far so good ... they pull off the line if they become trapped in debris .

I'd rather have these on the line than have a bow string tight line from rod tip to the lead.
 

Attachments

  • IMG_8660.webp
    IMG_8660.webp
    83.2 KB · Views: 42
I am of exactly the same mindset.

On lowland rivers such as the HA or small intimate rivers, where you are fishing for wary fish, close in and placing a rig in position I can see a benefit as you know exactly where the rig is and how it's positioned.

Anywhere more than a rod length out and with any flow and/or depth I can't fathom how they can work unless they are particularly heavy but then casting accurately would be a major issue.

A friend many years ago did some underwater filming for his book, (there's a full chapter on barbel rigs and how they present underwater, I think it may have been on the Warks Avon) with small back leads (like the ones Gardner now do) and he found them to get lifted off the bottom by the flow when casting across river.

Interestingly it was Stuart Morgan who did the underwear photography.

Pic of the page on back leading attached.

Thanks

Lewis
What’s the book called Lewis?
 
I use these on the Warks Avon mainly to convince myself the line is pinned down 18inches behind the lead .

So far so good ... they pull off the line if they become trapped in debris .

I'd rather have these on the line than have a bow string tight line from rod tip to the lead.
I get the theory, but if you’re only putting the backlead 18 inches above the lead, even if it is working as planned, you’ve got a tight line from rod tip to backlead instead. How long a hook link are you using?
 
I've used backleads in the past and never found they improved my catch rate. As others have said, a long hook length works just as well imo.
 
I have never done any research but I tend to feel that any light backlead will lift in a fast current and this is likely to be all the more likely when weed collects on the line. On the occasions when I feel a backlead is a good idea in these situations I use two leads of similar weight. E.g two 1.5's or two 2's. People use more than this sometimes!
I agree with what others have said about the Gardner 6g leads. A good idea and on occasion I have used two or three at a time but they are too light for a river with any pace.
Anywhere where I'm in doubt about the backlead lifting I don't bother, particularly anywhere with lots of weed or an uneven bottom.
 
Hi men ,

When me and Sue were sight fishing we noticed that back leading made a massive difference, but each situation was totally different due to flow .

Hatter
 
I get the theory, but if you’re only putting the backlead 18 inches above the lead, even if it is working as planned, you’ve got a tight line from rod tip to backlead instead. How long a hook link are you using?
My fishing is all done close in if possible Tom.. rod kept low etc . If I have to fish across to a feature then I will always put a bow in my line , I would say I rarely if ever have a bow string tight line . It's one of my pet hates and if you know what you are doing it's easily avoided .
Also bear in mind I specifically fish the upper to middle warks Avon which is not exactly a torrent of flowing water .

If I was on the Wye or Severn the approach would be alot more agricultural 😎👍
 
I get the theory, but if you’re only putting the backlead 18 inches above the lead, even if it is working as planned, you’ve got a tight line from rod tip to backlead instead. How long a hook link are you using?

Have a look at Simon Daley's approach to Barbel angling and how he's caught some very big and very pressured barbel from the Lea and Hamps Avon. He is very subtle and uses in line leads , backleads and at times leadcore .
Personally I much prefer his subtle approach to barbel fishing than the two rods pointing to the heavens , 4 oz feeders on bow string tight lines ... I like finesse in my angling 🌞👍😎
 
It seems to me that back leading is a tactic that's worth considering in the smaller rivers or those with not too much flow. In a big river scenario when you need to fish mid river or further to get to where the fish tend to hold, then a good bow in the line helps reduce the weight needed to hold bottom. Lighter leads mean less disturbance, which should be a benefit.
If you have a bow anyway, does the back lead make much difference? I'm not convinced.
I get that long hook links help keep everything concealed, but I think that whilst a long hook link works, it's not as effective at giving a secure hook hold, and leads to some lost fish.
 
Back
Top