• You need to be a registered member of Barbel Fishing World to post on these forums. Some of the forums are hidden from non-members. Please refer to the instructions on the ‘Register’ page for details of how to join the new incarnation of BFW...

Duplon

Steve Lewis

Senior Member & Supporter
As some of you know I've been out of the game since before covid for numerous reasons, but over the last few weeks I've been taking very tentative steps towards making plans for getting back on the bank (albeit not until next season at the earliest).

Anyway, mooching around at current tackle there seems to have been a huge move to part or full duplon covered rod butts again, even on some top-end rods. A few review and tackle shop vids I've seen on YouTube have all said something along the lines of "it's fashionable at the moment". What's going on here? When I first started in the early 90s duplon = budget and often low quality rods. When I got back into fishing in the 10s after a long break I was pleased to see that even affordable rods now had cork butts and duplon - dreadful stuff that it is - had finally been binned off for the most part.

Appreciate this is verging into old man yells at cloud territory, but are people REALLY preferring duplon now, or is it actually just stealth cost cutting?
 
I wouldn't touch a rod with 80s Duplon with a bargepole. It compressed, then became smooth and slippery with use. In the days of sliding band reel seats, this resulted in an insecure reel.

However, modern hard EVA is a different kettle of fish entirely. About ten years ago, I became aware of the Browning Sphere range of rods. With quite a dislike after suffering an abbreviated Duplon handled John Wilson Avon and a Shakespeare Omni Carbon Match, I backed away from the Spheres despite being very keen on the rod. Eventually, I gave in and bought a Sphere. It wasn't long before I bought more. Approaching nine years on, they are the first rods I've ever bought duplicates of just to have spares. I've also made an eleven foot spliced tip beck rod (out of a wrecked 13' rod) and fitted it with an EVA handle through choice.

A home made rod on the left, Browning Sphere on the right.
PXL_20260811_142742016.jpg


I don't doubt that Duplon/EVA is somewhat of a cost reduction scheme. However, modern EVA is usually quite different to 80s Duplon. EVA does have some positives beyond cost savings. I very much doubt that a modern cork handle would have worn as well as the EVA hadled Sphere pictured above that has been used a few hundred times.
 
Fair comments Chris. I think it simply boils down to me not liking the look or the feel of the stuff. Although, I have to say, I also own the old JW Avon with 50/50 cork-duplon and an Omni as well, both of which were absolutely hammered in the 90s and the duplon on both is still fine, save for a few knicks and small chunks missing here and there.
 
I quite like modern EVA on rods, but then I also have some rods fitted with JSR so I'm probably considered a philistine. I find EVA perfectly comfortable to handle and functional and I quite like the stealth element of it being black which is handy in certain situations.
 
It's all very cosmetic for me, so cork is back in fashion now as even the Carpy folks seem to be edging back towards cork handles. The bling phase maybe over for some, and then came black and stealthy, and now traditional. It's all just to keep selling rods remember.

For barbel rods then generally they're probably stay traditional as that is what people want; a rod you could have fished with 70 years ago, but slightly better .... maybe. :)
 
When I first started in the early 90s duplon = budget and often low quality rods.
I wouldn’t say that was always the case although yes some were pretty horrible but normark were using eva back ends from the very early 90’s with the mk11 early microlite. This then quickly was followed by the first 2000’s in 93 with duplon front grips on kdps with Eva back ends. It was all really good quality stuff built to last a long time.

I do agree that a full cork visually is the most appealing to see and it definitely feels the nicer material in the hand especially a high quality cork. Not like some that tend to be 50% wood filler.

That said, if I was picking a material for a rod handle it would definitely depend on what the rod was going to do.

For example EVA doesn’t rot or take on any moisture. It’s really light and hard wearing. If I was going to have a handle made for a float rod particularly one I deep wade with it would absolutely have at least 100mm of Eva on the back end.
This would also be the case if I was having a little quiver rod made where the back end is going to sit in wet grass or muddy ground on most uses.

For sitting in a pair of rests all day then yes a full cork no question.
 
When duplon becomes smooth and shiny on some rods, you can rub it down with light sandpaper. It’s what I’ve done in the past.

I don’t like the green duplon on the new Wychwood specimen rods. Rubbed my fingernails along one and it marked far too easily IMHO
 
Didn't quality cork become hard to source, and become very expensive ? I'm sure Mr Gill could enlighten us. @BobGill
 
One holiday, best forgotten, in corsica or sardinia, was enlightened by having a bungalow surrounded by cork trees and seeing how the bark was harvested.
 
Back
Top