• You need to be a registered member of Barbel Fishing World to post on these forums. Some of the forums are hidden from non-members. Please refer to the instructions on the ‘Register’ page for details of how to join the new incarnation of BFW...

Darent valley rods…

I don't have those particular models, but do own the 11' Specialist 0.75lb rods (a pair) and the 12' Specialist Float (1lb). Corners have been cut on the cosmetics to keep the price down, but the blanks themselves are excellent. The main cost saving is apparent on the handles, which are "cork style" (i.e. a thin layer of cork over some sort of composite). Having said that, the handles are showing no signs of wear after a couple of years' regular use. I think they're very good value for money.
 
I think as many others are going to say, brilliant rods, just built down to a price. Cheap rings and cork wrap over foam, but I have no issues with that.

0.75, 1.25 and 1.75 have all been in my collection. Classic through actions.

You can now buy them as bare blanks with the rings if you want to build your own up with slightly better components.
 
I have the 13ft two piece float rod which I bought to carry, all set up, with my normal barbel rods if I fancy doing a bit of float work for other species in the same session. I cannot find any fault with it.
 
I also just bought the two piece float rod for the convenience of leaving it set up. Not had a chance to use it just yet but impressed with the build for the money. The tackle box are an excellent company to deal with so buy with confidence.
 
As others have said the blanks are pretty good (i have 0.75 2x 1.25 twin tips and a 1.25 low guide set), the handles i think are fine for the money and the durability is good, they are also very short (which suited my needs), the quality of the guides is also good for the price (thankfully no minima style junk). The build itself is not so hot though, the gloss finishes all have clouds, fingerprints and dust throughout (you wont notice in natural light but look at it under ceiling lights in a dark room and its a very different picture), the ringing is nowhere near perfectly straight on any of them either, and on one Avon tip of my two twin tips there's a couple of guides that are noticeably out of line without really looking down the blank. The whippings are also a bit inconsistent in terms of there size and length and there are gaps towards the end of the guide legs where the leg shows through slightly. So in summary I'm happy with the components and the performance of the components but in my opinion the build quality is not on par with comparably prices rods. A £40-£50 korum rod is built to a much higher spec of finish (not necessarily components) than what I've seen from the Darent Valley range. That said I'm pretty fussy about this stuff and I look for it in the tackle i buy. If your the sort of person who wouldn't even think to check how straight the guides are whipped on to a rod then you will probably be more than happy with them. Hope this helps.
 
I was looking at one of the Darent Valley medium quiver tip feeder rods (forget which one), but was put off by the fact that The Tackle Box said the only quiver tips available for it were the ones it came with. The tone of their reply to my email was somewhat dismissive.

You were asking about rods on another thread, OP, with a budget of £400.00 for two rods and reels. I don't know why you're now looking at rods way below that budget, but I'l repeat what I said on the other thread, that the Guru Specimen Barbel 2.25lb is a beautifully finished rod, and for £100.00 it looks like a rod that should cost twice the price.

.
 
Last edited:
Ian McDonald said:
As others have said the blanks are pretty good (i have 0.75 2x 1.25 twin tips and a 1.25 low guide set), the handles i think are fine for the money and the durability is good, they are also very short (which suited my needs), the quality of the guides is also good for the price (thankfully no minima style junk). The build itself is not so hot though, the gloss finishes all have clouds, fingerprints and dust throughout (you wont notice in natural light but look at it under ceiling lights in a dark room and its a very different picture), the ringing is nowhere near perfectly straight on any of them either, and on one Avon tip of my two twin tips there's a couple of guides that are noticeably out of line without really looking down the blank. The whippings are also a bit inconsistent in terms of there size and length and there are gaps towards the end of the guide legs where the leg shows through slightly. So in summary I'm happy with the components and the performance of the components but in my opinion the build quality is not on par with comparably prices rods. A £40-£50 korum rod is built to a much higher spec of finish (not necessarily components) than what I've seen from the Darent Valley range. That said I'm pretty fussy about this stuff and I look for it in the tackle i buy. If your the sort of person who wouldn't even think to check how straight the guides are whipped on to a rod then you will probably be more than happy with them. Hope this helps.
Click to expand...
Interesting. I just relooked at my rod and the build is spot on. None of the faults that you have encountered at all. Not dismissing your experience though.
 
Kevin Steele said:
I was looking at one of the Darent Valley medium quiver tip feeder rods (forget which one), but was put off by the fact that The Tackle Box said the only quiver tips available for it were the ones it came with. The tone of their reply to my email was somewhat dismissive.

You were asking about rods on another thread, OP, with a budget of £400.00 for two rods and reels. I don't know why you're now looking at rods way below that budget, but I'l repeat what I said on the other thread, that the Guru Specimen Barbel 2.25lb is a beautifully finished rod, and for £100.00 it looks like a rod that should cost twice the price.

.
Click to expand...
Just weighing up all of my options, i dont want to rush into buying something for the sake of it.
 
I wanted the 1.5 elite as a barbel rod, they look nice, but, I could get the 1.5 FS River Tamer for similar price and have the extra quiver section.
 
You must log in or register to reply here.
Back
Top