David Craine
Senior Member & Supporter
I am of the keep it clean faction.
In fact, my carbon gear is always cleaned and tidily put away after use , reels swilled off and dried, lines checked, landing nets washed/dried as required. Bait boxes washed and dried, bait sorted and returned to bulk containers. End gear and bits boxes are cleaned of errant bits of bait, grass, , odd bits of this and that, and restocked as neccessary. I am the worlds worst at keeping my gear in order on the bank, stuff gets everywhere unless I am roving when I have the bare minimum. Bags are emptied of any bits of line, biscuit wrappers, sandwich bags of the day, or other litter that I have collected on the bank.
That is the carbon gear. My cane items, and there are quite a few are fastidiously checked for any scratches , if any are found I will cut back with 00 wire wool and re varnish, otherwise if OK I just wipe with a damp cloth, when dry give a quick spray wth silicone polish amd a buff up with a soft cloth. Bells High or low rider bridge rings can and will rust whilst you sit and look at them, especially after a rain shower. Agate rings can crack if caught on a tree or similar when casting, even a tap when in their rod bags can cause damage which will shred mono so they need careful attention.
The same treatment for vintage style or vintage net poles .Cane or Bentwood nets are washed, dried and the frames given a wipe over with Danish Oil .Spreader blocks cleaned of any mud or whatever , Steel or brass threads lubricated.Vintage centrepin reels are always taken apart, cleaned off lubricated and given a surface spray with silicone polish ( just the outsides )
Classic Fixed spools likewise but not fully stripped down.
I have several classic flamed, and flamed telescopic rod rests, made from Various thicknesses of Bamboo, they are also given the same treatment as above .
All this sounds like OCD, but as most of my vintage gear still used regularly is well over 60 years old, and functions like new, and in fact is probably worth three or more times what my Carbon stuff is, imo it is time well spent.
All my sea gear, boat and beach and lure is cleaned after every session, reels swilled off , gunk removed , dried , lubed and given a silicone spray and wipe over , rods as well, tackle box cleaned out and knives given a quick honing .All my soft Plastics that have been used are cleaned , dried and if needed taken to the shad clinic for major or minor surgery ( superglued back together ) End rigs checked, any that need so are taken apart, components saved for the next rig building session.Bait elastic dipsensers cleaned and bait loaders/needles etc cleaned as they do get very stinky .
Lines on every reel salt and fresh are checked regularly and replaced or reversed n the spools .
None of the above takes anything like the time you would think to do. All that is needed is a bit of space to work in, and the patience to work through the gear.
After reading the above I have decided that in fact I am OCD , but as all my gear is in good nick being OCD is a small price to pay.
David
In fact, my carbon gear is always cleaned and tidily put away after use , reels swilled off and dried, lines checked, landing nets washed/dried as required. Bait boxes washed and dried, bait sorted and returned to bulk containers. End gear and bits boxes are cleaned of errant bits of bait, grass, , odd bits of this and that, and restocked as neccessary. I am the worlds worst at keeping my gear in order on the bank, stuff gets everywhere unless I am roving when I have the bare minimum. Bags are emptied of any bits of line, biscuit wrappers, sandwich bags of the day, or other litter that I have collected on the bank.
That is the carbon gear. My cane items, and there are quite a few are fastidiously checked for any scratches , if any are found I will cut back with 00 wire wool and re varnish, otherwise if OK I just wipe with a damp cloth, when dry give a quick spray wth silicone polish amd a buff up with a soft cloth. Bells High or low rider bridge rings can and will rust whilst you sit and look at them, especially after a rain shower. Agate rings can crack if caught on a tree or similar when casting, even a tap when in their rod bags can cause damage which will shred mono so they need careful attention.
The same treatment for vintage style or vintage net poles .Cane or Bentwood nets are washed, dried and the frames given a wipe over with Danish Oil .Spreader blocks cleaned of any mud or whatever , Steel or brass threads lubricated.Vintage centrepin reels are always taken apart, cleaned off lubricated and given a surface spray with silicone polish ( just the outsides )
Classic Fixed spools likewise but not fully stripped down.
I have several classic flamed, and flamed telescopic rod rests, made from Various thicknesses of Bamboo, they are also given the same treatment as above .
All this sounds like OCD, but as most of my vintage gear still used regularly is well over 60 years old, and functions like new, and in fact is probably worth three or more times what my Carbon stuff is, imo it is time well spent.
All my sea gear, boat and beach and lure is cleaned after every session, reels swilled off , gunk removed , dried , lubed and given a silicone spray and wipe over , rods as well, tackle box cleaned out and knives given a quick honing .All my soft Plastics that have been used are cleaned , dried and if needed taken to the shad clinic for major or minor surgery ( superglued back together ) End rigs checked, any that need so are taken apart, components saved for the next rig building session.Bait elastic dipsensers cleaned and bait loaders/needles etc cleaned as they do get very stinky .
Lines on every reel salt and fresh are checked regularly and replaced or reversed n the spools .
None of the above takes anything like the time you would think to do. All that is needed is a bit of space to work in, and the patience to work through the gear.
After reading the above I have decided that in fact I am OCD , but as all my gear is in good nick being OCD is a small price to pay.
David