• You need to be a registered member of Barbel Fishing World to post on these forums. Some of the forums are hidden from non-members. Please refer to the instructions on the ‘Register’ page for details of how to join the new incarnation of BFW...

Spomb accuracy on a river?

Adam Francis

Senior Member & Supporter
I fish the middle Thames and using a deeper has been invaluable for finding the boat channels and deviations.
I'm fishing in around 3 metres depth at the moment with virtually no flow, add about 12 ft and clip up. I use a small spomb, the 3oz version I think, filled with hemp. I then cast my rig using the same clip with a 3oz lead.

2 questions:

1. Is 12 ft about right to allow for the drop in minimal flow and 3 metres depth?
2. How close do you think my rig is to the hemp?

Had me wondering the other night when fishing so thought I'd share as always interested to see what others think or would do.
 
You'd be surprised at how much less than that it is. Walk it out to your clipped up range and replicate the depth on the ground, in 10 ft of water at at 40 yards it won't drop back much, less than a foot. The closer you cast the more the drop back.

A few more factors affect results.

Edit, just googled it!!

 
What Bob is saying is correct, but an important factor is how well you judge the cast and feather it down so you don't get much bounce or springback when you hit the clip. The bounce can often be bigger than people realise, especially with mono.
 
Wow, that does surprise me. I know that Rob Hughes has done a few videos on this but all on lakes.

Ok, looks like I'll be allowing Ng much less line for the drop!
You'd be surprised at how much less than that it is. Walk it out to your clipped up range and replicate the depth on the ground, in 10 ft of water at at 40 yards it won't drop back much, less than a foot. The closer you cast the more the drop back.

A few more factors affect results.

Edit, just googled it!!

 
I agree with Bob and it's not a difficult calculation to work it out. It's just pythagorus a^2 + b^2 = c^2.
So with Bob's numbers simplified slightly for a 3 yrd drop.
40^2 + 3^2 = Sqr (1600 + 9) = 40.1
So you only need to add 0.1yrds (3 1/2")
Definitely not enought to worry about.
 
Back
Top