• You need to be a registered member of Barbel Fishing World to post on these forums. Some of the forums are hidden from non-members. Please refer to the instructions on the ‘Register’ page for details of how to join the new incarnation of BFW...

Please explain back-leading (on the Thames)

Steve Quinn

Senior Member
Been meaning to ask this question for a while, I haven't because I'm a little wary of looking like a slight fool. However it needs to be asked. If you were fishing a swim on the Thames roughly 7 to 8 foot in depth (in the middle of the river) and with the flow (which has increased in the last few days) downstream from a weir. Because of a restricted cast from overhanging trees, I cannot fish a long hook length. So it's gonna be a short 6 to 10". So I need to back lead, something I've never done in any of my fishing. I've bought some of those Gardner tungsten barbel back leads, but they weigh 6grm, how does that work if say I need 2oz plus to hold bottom on my main rig? If I use carp style back-leads I don't want to pull my mainline into weed beds that could be present in my margin. This whole back-leading thing is bamboozling my brain. So please unbamboozle it. Thank you.
 
Re casting restrictions dictating the need for a short hooklength, have you considered attaching an Avid PVA clip to your lead?

A PVA mesh bag is then attached and you nick your hook through the meshbag, thus halving the length of the hooklength on the cast. This way you can use a 4’+ long hooklength and not worry about the hook catching on anything. Tends to work best with a stiff hooklength material like fluorocarbon in my experience.

The only time I personally use the Gardner barbel back leads is when I’m fishing under the rod tip and I can lay everything out in a straight line.
 
Last edited:
I use the Gardner tungsten “flying” back leads but I’m not fishing anywhere as deep as you. I use PVA tape (tied in a double knot) on the line and it gives me about 4/5 casts before it completely disintegrates. That’s not gonna help you though as would like you don’t have much space to play with.

I’m with Neil on the PVA bag trick. It allows you to halve the length of your hook length but you’ll need to use a decent flouro so that it lies flat and springs back to full length. Fox Edges Illusion is good stuff.

 
Thanks for the replies.

I had a thought of using my Gardner weed rake (the ones you cast) and giving the swim a good going over and ripping anything out in the margin that could 'cause problems and once I'm happy with that then back-lead carp style. I think the 6grm back-lead is a waste of time (was obviously gonna fish it flying style) as it will be wafting in the flow somewhere behind the lead. I've watched Alan Stagg videos and he uses short hooklinks and back-leads like a carp angler. Like I mentioned back-leading is not something I've ever done on a lake, I do pinch a chunk of putty a few feet above my main lead and fish very light bobbins, which is similar in theory. But doing it on The Thames is a total different ball game. I think I may have to give it a practice session one afternoon this week so I get use to whatever I'm doing.
 
I fish the Thames (and other rivers) and use small running back leads all the time. I also routinely use tungsten tubing behind the lead.

The current tightens the line - so I fish with low rod tips and a heavy bobbin. Given that I only fish when the river has water ‘on’, the bobbin sits against the rod. My mate says the bobbin is pointless -he fishes a similar set up but watches the rod tip instead.

We fish short hooklinks and see little need for longer ones the way we fish (boilies/paste, rather than small baits).

In very heavy water we use captive backleads (Fox or similar) as it is the only way to hold bottom once 5 or 6oz starts bouncing down the river.

There was a thread a while back about upstream casting - you should search that out too.

Braid helps hold bottom; But I won’t use it. My mate has a love/hate relationship with it. He carries 2 spools and switches back to mono on a regular basis.
 
I use backleads on the Thames and Loddon.

Short hook link, 6-8 inches, 2oz line lead, 18 inches of leadcore (or lead free leader stuff) and one of the Gardner back lead things slipped onto the leadcore end to really pin that down. That’s just a push fit and can easily slip off in a break off situation (which I’ve never had, I use 12- 15lb mono)

Then, unless it’s a flood situation, I’ll use a 1 oz sliding back lead, a lighter one on the Loddon.

Using this rig it’s a self hooking rig so the bite indication is pretty damn obvious, you just need the line out the way of the fish approaching the bait - and the boats.

This pic hopefully shows how to use an inline lead safely with leadcore. In a break off everything pulls through the lead and the fish would be left with the hook link only.
 

Attachments

  • IMG_0853.jpeg
    IMG_0853.jpeg
    81.4 KB · Views: 103
  • IMG_0852.jpeg
    IMG_0852.jpeg
    84.4 KB · Views: 109
I think Tim and Simon may of nailed it. I'm at work now and will read it properly later 👍

Any other thoughts are of course welcome 🙂
 
I have simply used barrel leads of up to 1.5oz
3ft up the line from the lead or Feeder.
Stopped by a float stop and with the line held tight on hitting the water its all set up. You can probably reduce the main lead by a bit as well...

No reason you need a hooklink of more than 12 inches

Incidentally is a sideways cast impossible.
 
Just wanted to say thanks for your help on this subject. I fished the 6" short hooklink and slid a Korda 1.1oz backlead down the line, had the rod on a carp pod so pointing horizontal and had very good results, not barbel but a 4.08, 5.01, 5.02 and a 6.02 chub all last night. All bites pretty much screamed off, the first was a massive drop back. But had the rig positioned less downstream so this likely had something to do with that. Not sure how things will work when the Thames starts pushing through, though I'm sure I'll cross that bridge when I come to it 🎣 👍
 
In hindsight it's all pretty basic stuff, but mostly easier just to try these things on the bank. I have a tendency to overthink stuff and my brain feels as though it's gonna pop 😀
 
Back
Top