Korum river tripod buzz bars

[Peter Brownbill]

Has anyone changed the buzz bars to another type , I like to take them off after using the tripod as easy to go in quiver , find the buzz bars to big , any suggestions or am I being a tart

 

[Terry Harman]

you are being a tart but i would also like to change them far too chunky for me... i must be a tart too

 

[Jamie Warren]

Chris brown products

 

[Peter Brownbill]

Chris brown products

I have a Chris brown pod , with 2 rod buzz bars

 

[Richard Isaacs]

Has anyone changed the buzz bars to another type , I like to take them off after using the tripod as easy to go in quiver , find the buzz bars to big , any suggestions or am I being a tart

The speed connecting blocks just as unscrew and can be fitted to any buz bar. So yes you can fit what you like. Or at least that’s how the compact tripod works anyway.
I’m pretty sure the bigger one will work the same way.

 

[Terry Harman]

The speed connecting blocks just as unscrew and can be fitted to any buz bar. So yes you can fit what you like. Or at least that’s how the compact tripod works anyway.
I’m pretty sure the bigger one will work the same way.

ahh never knew that..... tart city here i come...got to be jag pro lite

 

[Richard Isaacs]

ahh never knew that..... tart city here i come...got to be jag pro lite

Yes you can tart them as much as you want.

 

[Terry Harman]

shame about the delkims

 

[Terry Harman]

because they have problems when it rains delkim have released there new snag ears

 

[Richard Isaacs]

shame about the delkims

Can’t remember how to use them it’s been that long. The remote thing won’t turn on so I’d imagine needs new batteries.
Edit ...... works now. Sod the smoke alarm

 

[Terry Harman]

Can’t remember how to use them it’s been that long. The remote thing won’t turn on so I’d imagine needs new batteries

you will need them in july

 

[Richard Isaacs]

you will need them in july

Na!!! I’ve got isotopes

 

[Terry Harman]

Na!!! I’ve got isotopes

you’ll be needing these then

 

[Peter Brownbill]

The speed connecting blocks just as unscrew and can be fitted to any buz bar. So yes you can fit what you like. Or at least that’s how the compact tripod works anyway.
I’m pretty sure the bigger one will work the same way.

Was just wondering what people were using as a replacement , seems Terry is goin the tart route

 

[Richard Isaacs]

If I just wanted the bar to be shorter Pete, I wouldn’t waste money buying a new one.
I’d drill out the 4 pop rivits to remove the ends. cut the bar at both ends to the desired length. Re drill and rivit it. Probably a 5 minute job.

 

[Bill Walford]

If I just wanted the bar to be shorter Pete, I wouldn’t waste money buying a new one.
I’d drill out the 4 pop rivits to remove the ends. cut the bar at both ends to the desired length. Re drill and rivit it. Probably a 5 minute job.

Five minute job Richard...you’ve not seen me with tools in my hands

 

[Richard Isaacs]

Five minute job Richard...you’ve not seen me with tools in my hands

Bill I’m sure in your wisdom there’s the knowledge to use a drill, hacksaw and a pop rivit.

 

[Peter Brownbill]

If I just wanted the bar to be shorter Pete, I wouldn’t waste money buying a new one.
I’d drill out the 4 pop rivits to remove the ends. cut the bar at both ends to the desired length. Re drill and rivit it. Probably a 5 minute job.

Never thought of it that way , must take a look , now where’s the rivet gun

 

[Bill Walford]

Bill I’m sure in your wisdom there’s the knowledge to use a drill, hacksaw and a pop rivit.

My Ole Chap (very good with his hands) used to cry when I picked up a screwdriver Richard

 

[Jon Frisby]

Am I right in thinking the bars on the tripod are different lengths? Can you not swap the front to the back vice versa?
I use a fox horizon and I have always done this, I'd rather have the rod tips pointing together than splayed. Just a thought.